Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Resetting the boot retry counter in the BIOS
▶
Enter the BIOS.
▶
Select the Management menu.
▶
Under Boot Retry Counter press the [+] or [-]
keys to specify the maximum
number of boot attempts (0 to 7).
▶
Exit the BIOS.
Resetting the boot retry counter using the ServerV
iew Operations
Manager
▶
In the ServerView Operations Manager Administration view, select Server
Configuration.
▶
If more than one server is managed in SVOM, select the target server and
click Next.
▶
From the Server Configuration menu pane, choose Restart Options.
▶
Under Reboot Retries, specify the maximum number of boot attempts (0 to
7) in the Default for reboot tries field.
Resetting the boot retry counter using iRMC S5 web interface
▶
Log in to the iRMC S5 web interface.
▶
Select the Settings menu.
▶
Select the Server Management menu.
▶
The following boot retry counter settings are available under Automatic
System Recovery & Restart (ASR&R):
▶
Under Retry counter max specify the maximum number of attempts to
boot the OS (0 to 7).
▶
Under Retry counter the current number of remaining boot attempts is
displayed. Overwrite this value with the maximum number of boot
attempts specified above in order to reset the boot retry counter.
▶
Click Apply for the changes to take effect.
Basic software procedures
98 Upgrade and Maintenance Manual RX2540 M6

Fujitsu PRIMERGY RX2540 M6 Specifications

General

Memory Slots	32 DIMM slots
Form Factor	2U rack server
Processor	Intel Xeon Scalable Processors (3rd generation)
Storage	Up to 24 x 2.5" or 12 x 3.5" drives
RAID Support	RAID 0, 1, 5, 6, 10
Network	4 x 1GbE ports (onboard), optional 10/25GbE
Power Supply	800 W, 1200 W, 1600 W
Expansion Slots	Up to 8x PCIe Gen4 slots
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Management	iRMC S5