88
Audio Setup
Using Masterpiece GUI Audio Menus
Buttons:
Trans - selection will push the Preset Audio into the main audio transition
Reset - resets the fader to 0dB (can be overridden by Morpheus automation)
Take - selection will push the Preset Audio to transition when the [Take Next] button is
pressed.
Touching the menu expander will open the settings dialog box. Touch the {Assign} button, the
button will light up “light blue”. The function will be displayed when scrolling through the
function list using the toggle buttons. To enable the function touch the OLED button.
Duck - selects whether a duck Level is applied to the “Program” when the Program goes to air.
In ducking, the level of one audio signal is reduced by the presence of another signal. For
example this can typically be achieved by lowering (ducking) the volume of a secondary audio
source when the primary audio source starts, and lifting the volume again when the primary
audio source is finished. A typical use of this effect is for creating a voice-over: a foreign
language original source is dubbed (and ducked) by someone reading the translation. Ducking
becomes active as soon as the translation starts.
To Next Page
Loading...
