93
Masterpiece
User Manual
The Voice Over “Prefade Metering” displays the voice over metering before the voice over
attenuation level has been applied.
Trans - selection will push the Preset Audio into the main audio transition
Reset - resets the fader to 0dB (can be overridden by Morpheus automation)
Cut On/Off - turn audio On/Off
Mix On/Off - mixes audio On/Off
Touching the menu expander will open the settings dialog box. Touch the {Assign} button, the
button will light up “light blue”. The function will be displayed when scrolling through the
function list using the toggle buttons. To enable the function touch the OLED button.
Note: The Cut - On lamp behavior is determined from Panel Config -
Preferences- Audio Mixer Lamp Mode.
To Next Page
Loading...
