111
Masterpiece
User Manual
UHD Output - Like the UHD Inputs, when UHD is selected in the “Mainframe Configuration” (in
the Logged Off state), selecting UHD Output “On” will tie Outputs 1 to 4 together. There will be
4x Outputs for every UHD source input to the mainframe, which consist of Output 1 (top left),
Output 2 (top right), Output 3 (bottom left) and Outputs 4 (bottom right). Select Output 1, then
touch the “UHD Output” {On} button.
12G/6G Output - this parameter callows 12G-SDI (2160p 60) and 6G-SDI (2160p 30) when set
to “Ye s ” sets the first 12G-SDI BNC output 1 (silver BNC). As the other outputs are setup as UHD
outputs in the outputs table, the 12G Output parameter can be set to “Yes” for outputs 1, 5 and
9 (the silver BNCs).
Payload UHD Channel ID - this parameter when set to “Yes” adds “Channel ID data” in UHD
mode. This provides data that allows downstream external equipment to identify the 4 UHD
channels.
Note: The menu below displays a system setup in UHD mode.
To Next Page
Loading...
