183
Masterpiece
User Manual
Spigot Menu
In the Spigot menu, the user is able to set the video standard for individual Spigots using the
“Format” parameter. Setting this parameter will allow more or less spigots to be used,
depending on the type of format that is selected for the spigot.
The “Streaming” parameter will set whether there are Dual or Single QSFP cages being used
on the selected IP Fin.
The “Audio Delay” parameter can be adjusted, if for instance the “Lip Sync” is out between
audio and video signals.
The Test Pattern attacher is able to output a Color Bar signal test pattern on the selected
Spigot.
Video Caption - allows the user to place text onto the test pattern.
Video Standard - allows the user to set the video standard of the test pattern.
Audio Frequency - sets the audio frequency of the test signal.
To Next Page
Loading...
