241
Masterpiece
User Manual
Touch the “Position & Size” parameter and “Zoom” down the Program tile and use the “X/Y
Position” to position the tile, you will start to see the Util Bus source displayed as the
background. The monitor output will look something like the diagram below:
As mentioned earlier, the Mixer DVE would be typically used for Background transitions in a
resized box. This would be done by using the “Position & Size parameters to size the Program
Tiles and using the {Take Next} button to Mix or Wipe between Program and Preset sources.
Utility Bus
Source
Program
Output
Tile
Note: The Utility Bus background cannot be zoomed or moved.
To Next Page
Loading...
