260
Macros
Offline Macro Editor
The “Text” function allows the user to type letters into the grid area using the on-screen
keyboard.
The “Font” parameter gives the user a selection of font choices when typing text using the on-
screen keyboard. Touch the {Text} button and a cursor is displayed in the grid. The cursor can
be moved to the required position in the grid by simply touching the cursor with a finger then
sliding it around the grid.
Touch the {Keyboard} button to display the on-screen keyboard and type text into the grid.
If the text is not in the correct position in the grid touch the {Move} button and use a finger to
slide the text around the grid to the correct position.
The “Store” attacher is used to select an internal Store or a Sub-Clip. This allows the user to
grab the image from the store and use it as an icon. In this attacher, the user can also select an
Icon from the icon library
Use the “Store”, “ Sub-Clip” or “Icon” parameters to select an image and then touch the {Grab
from} button to place the image into the grid.
If the grabbed image is going to be used in a mnemonic display, set the “Full Color Bgnd” to
“No” because the mnemonics are mono color. Set to “Ye s ” if the image is going to be used for
an OLED button.
To Next Page
Loading...
