291
Masterpiece
User Manual
How many Tie Lines?
How many Masterpiece inputs do you need to convert to Tie Lines? This is entirely dependent
on a few external factors, such as:
How many inputs available on the Masterpiece (max number shown below):
• HD = 40 Tie Lines
• UHD = 10 Tie Lines
• How many router destinations are available.
• How many router sources need to be selected on Masterpiece at any one time.
For example:
If you want to select different external router sources on the A and B buses this would require 2
Tie Lines.
For HD this would require 2 router destinations and 2 Masterpiece inputs.
For UHD this would require 8 router destinations and 8 Masterpiece inputs.
If you require external router sources on the A and B bus plus Key 1 and Key 2, this would
require 4 Tie Lines.
In summary: Each different external router source selected simultaneously requires a Tie Line.
Each Tie Line requires one router destination and Masterpiece input in HD, or 4 router
destinations and 4 Masterpiece inputs in UHD.
Note: If at all possible, it is recommended that the user creates more Tie
Lines than are actually required. This gives some redundancy and reduces
the risk of the system running out of available Tie Lines.
Note: External Router setup and configuration is in the Peripherals menu.
To Next Page
Loading...
