396
Peripherals
Peripherals - Others
Depending on hardware configurations, some LiveTouch systems can provide a thumbnail
image for the “Playlist” entries.
To do this, you will have to assign an optional "LiveTouch Minipic" protocol, following the
protocol setup process on the previous page.
Peripherals - LiveTouch Control
Touch the {Peripherals} button, then in the Peripherals menu touch the {LiveTouch Control...}
menu link button.
To select a new port to control, touch the {Select New Port} button. In the “Transport Control"
panel, if the "Port" is idle, touch the {Set to Play} button to change the port to playout mode.
While in playout mode, it shows the current “Playlist”, “Entry” and “Timecode”.
Buttons:
Recue - Recue current entry
Pause - Pause current entry
Play - Play current entry
Play All - Play from current entry till the end of the playlist
Play Next - Play the next entry
Play Next All - Play from next entry till the end of the playlist