SmartPAC 2 with WPC Integration 1126800
SmartPAC 2 Keyboard, Displays Chapter 3 Page 193
and Operating Modes
PROGRAM MODE MAIN MENU
SENSOR ENABLE/DISABLE & STATUS
RECALCULATE SETPOINTS
select
tool
GO TO THE TOOL MANAGER
SENSOR ON/OFF STATUS
TONNAGE/WAVEFORM
TOOL NAME
COUNTERS
DIE PROTECTION
CAM SWITCH
SHUTHGT/CNTRBAL
PRESS CONTROL
TOOL INFORMATION
F5
- LOAD THIS TOOL
BATCH 1
BATCH 2
BATCH 3
COUNTER INCREMENT ANGLES
F2
- ADVANCED MODES
STROKES
GOOD PARTS
BATCH 1
BATCH 2
BATCH 3
TOTAL HITS
F2
- SET COUNTER MODES
PARTS/STROKE
STROKES/PART
AUTO ENABLE COUNTER
select sensor
F6 - VIEW SENSOR SUMMARY
SENSOR NAME
SENSOR TYPE
STOP TYPE
READY WINDOW
select cam channel
F5
- VIEW GLOBAL CAMS
F6
- VIEW CAM SUMMARY
PROGRAM ON/OFF
PROGRAM TIMED OUTPUT
PROGRAM AUTO ADVANCE
PROGRAM DSV ON
DELETE CAM SETTINGS
OPERATING MODE
HIGH PERCENTAGE
LOW PERCENTAGE
REPEATABILITY
SAMPLE PERIOD
F7
- SHOW WAVEFORMS
SHUT HEIGHT
COUNTERBALANCE MODE
MAX UPPER DIE WEIGHT
UPPER DIE WEIGHT
F4
- SAVE THE SHUT HEIGHT
menu item
Function Key
F5
- LOAD TOOL
F6
- DELETE TOOL
F7
- NEW TOOL
F8
- COPY TOOL
F4
- EDIT TOOL
MINIMUM PRESS SPEED
MAXIMUM PRESS SPEED
CNTR BAL SETPOINT
TOP STOP ANGLE
CONTINUOUS SPEED
Figure 3 - 21. Navigation Example: Program Mode
Press ENTER to go in direction of arrow. Press RESET to return to previous menu.
This illustration includes some optional features; your menus may be different.
To Next Page
Loading...
Need help?
General
