1126800 SmartPAC 2 with WPC Integration
Page 262 Chapter 4 SmartPAC 2 Initialization Mode
Table 4 - 14. Setup E-mail Items
Item Description Examples
Mail Server
The name or IP address of the SMTP mail
server on your network
server.yourcompany.com
124.15.62.53
Mail Port
The port on the server used for mail.
Usually 25.
25
Use Secure Login
Indicates whether a username and
password are required to log in to the
network
TRUE = password required
FALSE = no password required
If “FALSE,” you don’t need to enter
username or password.
FALSE
TRUE
Username
The username for logging into the network,
if necessary
username
joe_user
Password
The password for logging into the network,
if necessary
password
secret452
Email Error
Recipient
SmartPAC 2 cannot receive e-mail. This
address receives the message issued
when an e-mail fails to be delivered
ErrorRecipient @yourcompany.com
joe.user@yourcompany.com
E-mail From
Name
Name listed on the e-mail as who sent the
message. Some networks require a
particular format of “from” name.
FromRecipient@yourcompany.com
Press_14@yourcompany.com
Wintriss E-mail
Addr
The e-mail address for Wintriss Tech
Support. Use default unless instructed
otherwise.
Wintriss.Acton@honeywell.com
CHANGE NETWORK SETTINGS
(INITIALIZATION – SETUP NETWORK – CHANGE NETWORK SETTINGS)
Contact Wintriss Tech Support for assistance in making advanced network setups. Your
Information Technology or Information Systems person will make these settings if necessary.
NOTICE
SETTING STATIC IP ADDRESS
SmartPAC 2 comes from the factory set up for a Dynamic Host Configuration Protocol
(DHCP) network, which automatically assigns IP addresses. If your network requires static
IP addresses, have the person who supports your network contact Wintriss Tech Support for
assistance in setting up SmartPAC 2 with a static IP address.
To Next Page
Loading...
Need help?
General
