Honeywell SmartPAC 2 - Page 283

SmartPAC 2 with WPC Integration 1126800
SmartPAC 2 Initialization Mode Chapter 4 page 261
After you fill in the information on this screen, you will use SmartView to complete setting
up the e-mail messages and recipients (see “Appendix D – SmartView,” page 455) for your
SmartPAC 2.
1.
Highlight an item and press ENTER. A text-entry window appears.
2.
Fill in the appropriate name or text. Press F6 to accept the text.
3. Repeat for each item.
4. When you have finished filling in the items, press F2 to apply the changes you have
made.
NOTICE
You can use a separate computer keyboard to enter names. See page 270.
NOTICE
To e-mail a copy of this screen, see “Screen Capture,” page 199.