SmartPAC 2 with WPC Integration 1126800
Installing SmartPAC 2 and WPC Chapter 2 page 51
circuits, wire them between terminals #79 and #80 or between terminals #79 and #81. Refer
to Figure 2 at the end of this manual for specific wiring schematics.
Use customized status code wiring (see “Wiring WPC User Inputs,” page 52) when the
auxiliary equipment that you are connecting does not have its own self-explanatory displays,
as is available in DiPro 1500 or AutoSet load analyzers.
To Next Page
Loading...
