Lexmark MS911 - 2500-Sheet Tray Motor Tests; 2 X500-Sheet Tray Motor Tests; Staple and Hole Punch Finisher Motor Tests; Staple Finisher Motor Tests

2x500‑Sheet Tray Motor Tests
These tests verify that the 2 x 500‑sheet tray motors are working properly.
1 Enter the Diagnostics Menu, and then navigate to:
Motor Tests > 2x500‑Sheet Tray Motor Tests
2 Select a motor.
3 Check if the motor runs.
2500‑Sheet Tray Motor Tests
These tests verify that the 2500‑sheet tray motors are working properly.
1 Enter the Diagnostics Menu, and then navigate to:
Motor Tests > 2500‑Sheet Tray Motor Tests
2 Select a motor.
3 Check if the motor runs.
3000‑Sheet Tray Motor Tests
These tests verify that the 3000‑sheet tray motors are working properly.
1 Enter the Diagnostics Menu, and then navigate to:
Motor Tests > 3000‑Sheet Tray Motor Tests
2 Select a motor.
3 Check if the motor runs.
Staple Finisher Motor Tests
These tests verify that the staple finisher motors are working properly.
1 Enter the Diagnostics Menu, and then navigate to:
Motor Tests > Staple Finisher Motor Tests
2 Select a motor.
3 Check if the motor runs.
Staple and Hole Punch Finisher Motor Tests
These tests verify that the staple and hole punch finisher motors are working properly.
1 Enter the Diagnostics Menu, and then navigate to:
Motor Tests > Staple and Hole Punch Finisher Motor Tests
2 Select a motor.
3 Check if the motor runs.
4021, 7421
Service menus
196