Lexmark MS911 - Motor (SHPF Aligner) Removal; SHPF Diverter Cam Removal

Motor (SHPF aligner) removal
1 Remove the front door. See “SHPF front door removal” on page 336.
2 Remove the top inner cover. See “SHPF top inner cover removal” on page 336.
3 Disconnect the cable (A).
4 Remove the two screws (B), and then remove the motor bracket.
5 Remove the motor from the bracket.
SHPF diverter cam removal
1 Remove the front door. See “SHPF front door removal” on page 336.
2 Remove the top inner cover. See “SHPF top inner cover removal” on page 336.
3 Remove the diverter feed roller knob. See “SHPF diverter feed roller knob removal” on page 337.
4 Open the top door and top jam access door.
5 Disconnect the cable (A).
4021, 7421
Repair information
391