Lexmark MS911 - Insufficient Memory to Collate Job [37]; Insufficient Memory to Support Resource Save Feature [35]; Insufficient Memory, some Held Jobs Were Deleted [37]; Insufficient Memory, some Held Jobs will Not be Restored [37]

Insufficient memory to collate job [37]
Try one or more of the following:
• From the printer control panel, touch Continue to print the part of the job already stored and begin collating the
rest of the print job.
• Cancel the current print job.
Insufficient memory to support Resource Save feature [35]
Install additional printer memory or touch Continue to disable Resource Save, clear the message, and continue printing.
Insufficient memory, some Held Jobs were deleted [37]
From the printer control panel, touch Continue to clear the message.
Insufficient memory, some held jobs will not be restored [37]
Try one or more of the following:
• From the printer control panel, touch Continue to clear the message.
• Delete other held jobs to free up additional printer memory.
Insufficient space between paper stacks in Tray 3
Move the paper stacks apart, and then touch Continue on the control panel to clear the message and continue printing.
Load [paper source] with [custom string] [paper orientation]
Try one or more of the following:
• Load the tray or feeder with the correct size and type of paper, and then touch Finished loading paper on the
control panel.
• Touch Reset active bin to reset the active bin for a linked set of bins.
• Cancel the current job.
Load [paper source] with [custom type name] [paper orientation]
Try one or more of the following:
• Load the tray or feeder with the correct size and type of paper, and then touch Finished loading paper on the
control panel.
• Touch Reset active bin to reset the active bin for a linked set of bins.
• Cancel the print job.
4021, 7421
Diagnostic information
40