4 Remove the four screws (A), and then remove the bracket.
5 Remove the two clips (B), and then remove the gears.
Bifold knife and tamper assembly removal
Note: This part is not a FRU.
1 Remove the front cover. See “Booklet maker front cover removal” on page 456.
2 Remove the right cover. See “Booklet maker right cover removal” on page 457.
3 Remove the top frame brace. See “Top frame brace removal” on page 463.
4 Remove the middle frame brace. See “Middle frame brace removal” on page 464.
4021, 7421
Repair information
517
To Next Page
Loading...
