10 Remove the two clips (A), and then remove the bushings.
11 Remove the assembly.
Staple finisher eject guide removal
1 Remove the front cover. See “Staple finisher front cover removal” on page 229.
2 Remove the rear cover. See “Staple finisher rear cover removal” on page 230.
3 Remove the top cover. See “Staple finisher top cover removal” on page 231.
4 Remove the controller board. See “Staple finisher controller board removal” on page 244.
5 Remove the controller board holder. See “Staple finisher controller board holder removal” on page 245.
4021, 7421
Repair information
306
To Next Page
Loading...
