3 Remove the rear cover. See “SHPF rear cover removal” on page 339.
4 Remove the punch unit. See “Punch unit removal” on page 365.
5 Open the top door and top jam cover.
6 From the front, remove the screw (A).
7 From the rear, remove the two screws (B), and then remove the guide.
SHPF diverter feed roller removal
1 Remove the front door. See “SHPF front door removal” on page 336.
2 Remove the top inner cover. See “SHPF top inner cover removal” on page 336.
4021, 7421
Repair information
426
To Next Page
Loading...
