Lexmark MS911 - Trifold Gears Removal

5 Remove the clip (B), and then remove the bushing.
6 Remove the screw (C).
7 Remove the clip (D), and then remove the bushing.
8 Remove the rollers.
Trifold gears removal
1 Remove the exit roller springs. See “Booklet maker exit roller springs removal” on page 455.
2 Remove the front cover. See “Booklet maker front cover removal” on page 456.
3 Remove the bifold roller gears bracket. See “Bifold roller gears removal” on page 471.
4021, 7421
Repair information
473