5 Remove the motor (SHPF compiler eject) or motor (SHPF compiler pre-eject). See “Motor (SHPF compiler eject)
removal” on page 399 or “Motor (SHPF compiler pre-eject) removal” on page 400.
6 Remove the sensor.
# Part
1 Sensor (SHPF compiler pre-eject)
2 Sensor (SHPF compiler eject)
Sensor (SHPF eject clamp position) removal
1 Remove the elevator bin. See “SHPF elevator bin removal” on page 331.
2 Remove the elevator bin bracket. See “SHPF elevator bin bracket removal” on page 332.
3 Remove the HBPF lower left cover or the SHPF lower left cover. See “Lower left cover removals” on page 344.
4 Remove the upper left cover. See “SHPF upper left cover removal” on page 348.
5 Remove the actuator (A).
4021, 7421
Repair information
402
To Next Page
Loading...
