16 Remove the two springs (J), and then remove the roller.
SHPF compiler bails removal
1 Remove the top bin extender. See “SHPF top bin extender removal” on page 331.
2 Remove the front door. See “SHPF front door removal” on page 336.
3 Remove the top inner cover. See “SHPF top inner cover removal” on page 336.
4 Remove the paddle motor bracket. See “SHPF paddle motor bracket removal” on page 383.
5 Remove the trailing edge stopper motor. See “Motor (SHPF aligner) removal” on page 391.
6 Remove the rear cover. See “SHPF rear cover removal” on page 339.
7 Remove the elevator motor bracket. See “Motor (SHPF elevator) removal” on page 359.
8 Remove the elevator bin stack limit actuator. See “SHPF elevator bin stack limit actuator removal” on page 429.
9 Remove the top bin. See “SHPF top bin removal” on page 433.
10 Remove the staple unit assembly. See “SHPF staple unit assembly removal” on page 367.
4021, 7421
Repair information
451
To Next Page
Loading...
