3 Pry the sensor, and then disconnect the cable.
SHPF top bin exit paper guide removal
1 Remove the front door. See “SHPF front door removal” on page 336.
2 Remove the top inner cover. See “SHPF top inner cover removal” on page 336.
3 Remove the rear cover. See “SHPF rear cover removal” on page 339.
4 Remove the sensor (SHPF top bin exit). See “Sensor (SHPF top bin exit) removal” on page 397.
5 Remove the compiler feed roller release motor bracket. See “SHPF compiler feed roller release motor bracket
removal” on page 389.
6 Remove the transport motor bracket. See “Motor (SHPF transport) removal” on page 356.
7 Disconnect the cable (A), and then remove the two screws (B).
4021, 7421
Repair information
398
To Next Page
Loading...
