11 Remove the two clips (C), and then remove the bearing.
12 Remove the roller.
SHPF compiler feed idler roller assembly removal
1 Remove the top bin extender. See “SHPF top bin extender removal” on page 331.
2 Remove the front door. See “SHPF front door removal” on page 336.
3 Remove the top inner cover. See “SHPF top inner cover removal” on page 336.
4 Remove the rear cover. See “SHPF rear cover removal” on page 339.
5 Remove the sensor (SHPF top bin exit). See “Sensor (SHPF top bin exit) removal” on page 397.
6 Remove the top bin exit paper guide. See “SHPF top bin exit paper guide removal” on page 398.
7 Remove the transport motor bracket. See “Motor (SHPF transport) removal” on page 356.
8 Remove the paddle motor bracket. See “SHPF paddle motor bracket removal” on page 383.
9 Remove the exit roller cam. See “SHPF compiler feed roller release cam removal” on page 436.
10 Remove the top bin transport roller. See “SHPF top bin transport roller removal” on page 438.
4021, 7421
Repair information
440
To Next Page
Loading...
