Lexmark MS911 - Staple Finisher Lock Switch Removal; Staple Finisher Locks Removal

Staple finisher lock switch removal
1 Remove the front cover. See “Staple finisher front cover removal” on page 229.
2 Remove the clip (A), and then remove the handle.
3 Disconnect the cable (B).
4 Remove the screw (C), and then remove the switch.
Staple finisher locks removal
1 Remove the front cover. See “Staple finisher front cover removal” on page 229.
2 Remove the rear cover. See “Staple finisher rear cover removal” on page 230.
4021, 7421
Repair information
241