6 Remove the upper guide. See “Staple finisher upper guide removal” on page 287.
7 Remove the lower guide. See “Staple finisher lower guide removal” on page 291.
8 Remove the three screws (A), and then remove the rail.
Staple finisher compiler feed roller guide removal
1 Remove the front cover. See “Staple finisher front cover removal” on page 229.
2 Remove the rear cover. See “Staple finisher rear cover removal” on page 230.
3 Remove the top cover. See “Staple finisher top cover removal” on page 231.
4 Remove the upper guide. See “Staple finisher upper guide removal” on page 287.
5 Remove the lower guide. See “Staple finisher lower guide removal” on page 291.
4021, 7421
Repair information
293
To Next Page
Loading...
