5 From the rear, remove the clip (B), and then remove the gear.
6 Remove the clip (C), and then remove the bearing.
7 Remove the roller.
SHPF booklet maker lower pre-feed guide removal
1 Remove the front door. See “SHPF front door removal” on page 336.
2 Remove the top inner cover. See “SHPF top inner cover removal” on page 336.
3 Remove the rear cover. See “SHPF rear cover removal” on page 339.
4 Remove the booklet maker pre-feed roller. See “SHPF booklet maker pre-feed roller removal” on page 421.
4021, 7421
Repair information
422
To Next Page
Loading...
