Lexmark MS911 - Motor (Booklet Maker Aligner) Removal; Motor (Bifold Knife) Removal

Motor (booklet maker aligner) removal
1 Remove the front cover. See “Booklet maker front cover removal” on page 456.
2 Remove the right cover. See “Booklet maker right cover removal” on page 457.
3 Disconnect the cable (A).
4 Remove the two screws (B), and then remove the motor.
Motor (bifold knife) removal
1 Remove the front cover. See “Booklet maker front cover removal” on page 456.
2 Remove the right cover. See “Booklet maker right cover removal” on page 457.
3 Disconnect the cable (A).
4021, 7421
Repair information
491