10 Remove the clip (C), and then remove the gear.
11 Remove the knife from the assembly.
12 Remove the four screws (D), and then remove the bushings.
Bifold roller drive gears removal
1 Remove the front cover. See “Booklet maker front cover removal” on page 456.
2 Remove the right cover. See “Booklet maker right cover removal” on page 457.
3 Remove the top frame brace. See “Top frame brace removal” on page 463.
4 Remove the middle frame brace. See “Middle frame brace removal” on page 464.
5 Remove the bifold roller gears bracket. See “Bifold roller gears removal” on page 471.
6 Remove the bifold knife primary drive gears bracket. See “Bifold knife primary drive gears removal” on page
516.
7 Remove the bifold knife and tamper assembly. See “Bifold knife and tamper assembly removal” on page 517.
4021, 7421
Repair information
522
To Next Page
Loading...
