7 Remove the elevator bin stack limit actuator. See “SHPF elevator bin stack limit actuator removal” on page 429.
8 Release the latch (A), and then remove the sensor.
SHPF top bin removal
1 Remove the top bin extender. See “SHPF top bin extender removal” on page 331.
2 Remove the front door. See “SHPF front door removal” on page 336.
3 Remove the top inner cover. See “SHPF top inner cover removal” on page 336.
4 Remove the paddle motor bracket. See “SHPF paddle motor bracket removal” on page 383.
5 Remove the rear cover. See “SHPF rear cover removal” on page 339.
6 Remove the elevator motor bracket. See “Motor (SHPF elevator) removal” on page 359.
7 Set aside the elevator bin stack limit actuator. See “SHPF elevator bin stack limit actuator removal” on page 429.
4021, 7421
Repair information
433
To Next Page
Loading...
