3 Remove the two screws (B), and then remove the brace.
Booklet maker jam access door removal
1 Remove the front cover. See “Booklet maker front cover removal” on page 456.
2 Remove the right cover. See “Booklet maker right cover removal” on page 457.
3 Remove the top frame brace. See “Top frame brace removal” on page 463.
4 Disconnect the two springs (A) from the frame.
5 Pry the front hinge, and then remove the jam access door.
Installation note: The tab (A) should be behind the door. Also check for proper movement of the door.
4021, 7421
Repair information
465
To Next Page
Loading...
