6 Remove the two screws (B), and then remove the bracket.
7 Remove the cam assembly (C).
Sensor (SHPF diverter cam) removal
1 Remove the front door. See “SHPF front door removal” on page 336.
2 Remove the top inner cover. See “SHPF top inner cover removal” on page 336.
3 Remove the diverter feed roller knob. See “SHPF diverter feed roller knob removal” on page 337.
4 Disconnect the cable (A)
4021, 7421
Repair information
392
To Next Page
Loading...
