Motor (staple finisher staple unit carriage) removal
1 Remove the front cover. See “Staple finisher front cover removal” on page 229.
2 Remove the staple unit. See “Staple finisher staple unit removal” on page 260.
3 Remove the staple unit carriage assembly. See “Staple finisher staple unit carriage assembly removal” on page
261.
4 Disconnect the cable (A).
5 Remove the two screws (B), and then remove the motor.
Staple finisher staple unit carriage removal
1 Remove the front cover. See “Staple finisher front cover removal” on page 229.
2 Remove the staple unit. See “Staple finisher staple unit removal” on page 260.
3 Remove the staple unit carriage assembly. See “Staple finisher staple unit carriage assembly removal” on page
261.
4 Disconnect the cable (A).
4021, 7421
Repair information
263
To Next Page
Loading...
