4 Remove the four screws (B), and then remove the motor.
Motor (booklet maker tamper) removal
1 Remove the front cover. See “Booklet maker front cover removal” on page 456.
2 Remove the right cover. See “Booklet maker right cover removal” on page 457.
3 Remove the top frame brace. See “Top frame brace removal” on page 463.
4 Remove the middle frame brace. See “Middle frame brace removal” on page 464.
5 Disconnect the cable (A).
6 Remove the two screws (B), and then remove the motor.
4021, 7421
Repair information
492
To Next Page
Loading...
