Lexmark MS911 - Motor (Trifold Guide) Removal; Trifold Guide Motor Bracket Removal

Motor (trifold guide) removal
1 Remove the front cover. See “Booklet maker front cover removal” on page 456.
2 Disconnect the cable (A).
3 Remove the two screws (B), and then remove the motor.
Trifold guide motor bracket removal
1 Remove the front cover. See “Booklet maker front cover removal” on page 456.
2 Disconnect the two cables (A).
3 Remove the three screws (B), and then remove the bracket.
4021, 7421
Repair information
489