12 Remove the clip (C), and then remove the bushing.
13 Remove the clip (D), and then remove the assembly.
Staple finisher compiler feed rollers and gears removal
1 Remove the front cover. See “Staple finisher front cover removal” on page 229.
2 Remove the rear cover. See “Staple finisher rear cover removal” on page 230.
3 Remove the top cover. See “Staple finisher top cover removal” on page 231.
4 Remove the controller board. See “Staple finisher controller board removal” on page 244.
5 Remove the controller board holder. See “Staple finisher controller board holder removal” on page 245.
4021, 7421
Repair information
298
To Next Page
Loading...
