Paper type Staple finisher Staple, hole punch finisher Booklet finisher
Envelope
2 3
X
Rough Envelope
2 3
X
Letterhead
5
Preprinted
5
Colored Paper
5
Light Paper
5
Heavy Paper
2 4
X
Rough Cotton
2
X
Custom Type
5
1
Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information, see
“Tips on using transparencies” on page 31.
2
Paper is supported only if the finisher stacks the paper but does not staple it.
3
Paper is supported only if the finisher stacks the paper but does not staple or punch holes in it.
4
Paper is supported only if the finisher punches holes or stacks the paper but does not staple it.
5
Paper is supported only if the finisher staples or folds the paper.
Tools required for service
• Flat-blade screwdrivers, various sizes
• #1 Phillips screwdriver, magnetic
• #2 Phillips screwdriver, magnetic
• #2 Phillips screwdriver, magnetic short-blade
• Needle‑nose pliers
• Diagonal side cutters
• Spring hook
• Feeler gauges
• Analog or digital multimeter
• Flashlight (optional)
4021, 7421
General information
33
To Next Page
Loading...
