Lexmark MS911 - SHPF Staple Unit Drive Belt and Gear Removal

SHPF staple unit drive belt and gear removal
1 Remove the front door. See “SHPF front door removal” on page 336.
2 Remove the top inner cover. See “SHPF top inner cover removal” on page 336.
3 Remove the staple unit assembly. See “SHPF staple unit assembly removal” on page 367.
4 Remove the clip (A).
5 Remove the gear and belt.
6 Remove the screw (B), and then remove the knob.
4021, 7421
Repair information
370