Staple finisher exit roller gear removal
1 Remove the front cover. See “Staple finisher front cover removal” on page 229.
2 Remove the exit motor bracket. See “Exit motor bracket removal” on page 277.
3 Disconnect the spring (A).
4 Unlatch and then remove the gear (B).
Staple finisher lower exit roller removal
1 Remove the front cover. See “Staple finisher front cover removal” on page 229.
2 Remove the bin. See “Staple finisher bin removal” on page 232.
3 Remove the left inner cover. See “Staple finisher left inner cover removal” on page 233.
4 Remove the exit motor bracket. See “Exit motor bracket removal” on page 277.
5 Remove the exit roller gear. See “Staple finisher exit roller gear removal” on page 286.
6 Remove the two clips (A), and then release the bushings.
4021, 7421
Repair information
286
To Next Page
Loading...
