5 Remove the two screws (B), and then remove the bracket.
6 Remove the sensor from the bracket.
SHPF entrance and diverter feed roller gears removal
1 Remove the front door. See “SHPF front door removal” on page 336.
2 Remove the top inner cover. See “SHPF top inner cover removal” on page 336.
3 Remove the diverter feed roller knob. See “SHPF diverter feed roller knob removal” on page 337.
4 Remove the diverter cam. See “SHPF diverter cam removal” on page 391.
5 Disconnect the cable (A).
4021, 7421
Repair information
393
To Next Page
Loading...
