Lexmark MS911 - HPT Belts and Gears Removal; HPT Transport Rollers Removal

5 Remove the two screws (D), and then remove the motor.
HPT belts and gears removal
1 Remove the rear cover. See “HPT rear cover removal” on page 325.
2 Remove the motor (HPT transport). See “Motor (HPT transport) removal” on page 327.
3 Remove the four clips (A), and then remove the four washers.
4 Remove the four gears and belts.
HPT transport rollers removal
1 Remove the rear cover. See “HPT rear cover removal” on page 325.
2 Remove the motor (HPT transport). See “Motor (HPT transport) removal” on page 327.
3 Remove the HPT belts and gears. See “HPT belts and gears removal” on page 329.
4021, 7421
Repair information
329