Clear Log
This setting clears current information in the EVENT LOG.
1 Enter the Diagnostics Menu, and then navigate to:
EVENT LOG > Clear Log
2 Select a setting.
3 Apply the changes.
Print Log Summary
This setting prints a summary of the printed event logs.
Enter the Diagnostics Menu, and then navigate to:
EVENT LOG > Print Log Summary
SCANNER TESTS
ADF Front Magnification
This setting adjusts the ADF front magnification levels.
1 Enter the Diagnostics Menu, and then navigate to:
SCANNER TESTS > ADF Front Magnification
2 Select ADF Front Vertical Magnification or ADF Front Horizontal Magnification.
3 Adjust the magnification setting, and then apply the changes.
ADF Back Magnification
This setting adjusts the ADF back magnification levels.
1 Enter the Diagnostics Menu, and then navigate to:
SCANNER TESTS > ADF Back Magnification
2 Select ADF Back Vertical Magnification or ADF Back Horizontal Magnification.
3 Adjust the magnification setting, and then apply the changes.
FB Magnification
This setting adjusts the flatbed magnification levels.
1 Enter the Diagnostics Menu, and then navigate to:
SCANNER TESTS > FB Magnification
2 Select Flatbed Vertical Magnification or Flatbed Horizontal Magnification.
3 Adjust the magnification setting, and then apply the changes.
4021, 7421
Service menus
201
To Next Page
Loading...
