Lexmark MS911 - SHPF Elevator Top Rear Gear Removal; SHPF Elevator Top Front Gear Removal

SHPF elevator top rear gear removal
1 Remove the rear cover. See “SHPF rear cover removal” on page 339.
2 Remove the elevator motor bracket. See “Motor (SHPF elevator) removal” on page 359.
3 Remove the elevator drive assembly. See “SHPF elevator drive assembly removal” on page 362.
4 Remove the elevator bottom rear gear. See “SHPF elevator bottom rear gear removal” on page 375.
5 Remove the clip (A), and then remove the gear.
SHPF elevator top front gear removal
1 Remove the front door. See “SHPF front door removal” on page 336.
2 Remove the top inner cover. See “SHPF top inner cover removal” on page 336.
3 Remove the lower cover. See “SHPF lower cover removal” on page 333.
4 Remove the post cover. See “SHPF post cover removal” on page 338.
5 Remove the elevator motor bracket. See “Motor (SHPF elevator) removal” on page 359.
6 Remove the elevator bottom front gear. See “SHPF elevator bottom front gear removal” on page 376.
4021, 7421
Repair information
381