Lexmark MS911 - SHPF Entrance Guide Removal; Sensor (SHPF Entrance) Removal

SHPF entrance guide removal
1 Remove the seven screws (A).
2 Remove the guide.
Sensor (SHPF entrance) removal
1 Remove the front door. See “SHPF front door removal” on page 336.
2 Remove the top inner cover. See “SHPF top inner cover removal” on page 336.
3 Remove the top door. See “SHPF top door removal” on page 339.
4 Remove the entrance guide. See “SHPF entrance guide removal” on page 446.
4021, 7421
Repair information
446