Booklet maker aligner removal
1 Remove the aligner jam access cover. See “Booklet maker aligner jam access door removal” on page 460.
2 Remove the front cover. See “Booklet maker front cover removal” on page 456.
3 Remove the right cover. See “Booklet maker right cover removal” on page 457.
4 Remove the aligner assembly. See “Booklet maker aligner assembly removal” on page 496.
5 Release the aligner from the two latches (A).
Installation note: Align the holder with the link.
4021, 7421
Repair information
498
To Next Page
Loading...
