3 Remove the rear guide rail. See “Staple finisher guide rails removal” on page 243.
4 Remove the motor (staple finisher elevator). See “Motor (staple finisher elevator) removal” on page 250.
5 Remove the six screws (A), and then remove the bracket.
6 Remove the four clips (B), and then remove all the gears from the bracket.
Staple finisher elevator belts removal
1 Remove the bin. See “Staple finisher bin removal” on page 232.
2 Remove the rear cover. See “Staple finisher rear cover removal” on page 230.
3 Remove the front cover. See “Staple finisher front cover removal” on page 229.
4021, 7421
Repair information
272
To Next Page
Loading...
