3 Remove the rear cover. See “SHPF rear cover removal” on page 339.
4 Remove the punch unit. See “Punch unit removal” on page 365.
5 Remove the diverter feed roller knob. See “SHPF diverter feed roller knob removal” on page 337.
6 Remove the diverter feed guide. See “SHPF diverter feed guide removal” on page 425.
7 From the front, remove the two screws (A), and then set aside the bracket.
8 Remove the clip (B), and then remove the gear.
9 Remove the two clips (C), and then remove the gear.
4021, 7421
Repair information
427
To Next Page
Loading...
