8 Remove the paddle motor bracket. See “SHPF paddle motor bracket removal” on page 383.
9 Remove the exit roller cam. See “SHPF compiler feed roller release cam removal” on page 436.
10 Remove the top bin transport roller. See “SHPF top bin transport roller removal” on page 438.
11 Remove the compiler feed idler roller assembly. See “SHPF compiler feed idler roller assembly removal” on
page 440.
12 Disconnect the cable (A), and then remove the screw (B).
13 Remove the sensor holder.
14 Disconnect the cable (C), and then remove the sensor.
4021, 7421
Repair information
443
To Next Page
Loading...
