Assembly 31: SHPF—Compiler section 3
Asm-index P/N Units/opt Units/FRU Description Removal procedure
1 40X9195 1 1 SHPF front tamper holder --
2 40X8869 1 1 Sensor (SHPF front tamper
home)
“Sensor (SHPF front tamper home) removal ”
on page 355
3 40X9641 2 1 SHPF tamper belt
“SHPF tamper belts and gears removal” on
page 412
4 40X9595 2 1 SHPF tamper gear
“SHPF tamper belts and gears removal” on
page 412
5 40X9344 2 1 SHPF tamper drive belt
“SHPF tamper belts and gears removal” on
page 412
6 40X9485 2 1 SHPF tamper drive gear
“SHPF tamper belts and gears removal” on
page 412
7 40X9530 1 1 Motor (SHPF front tamper)
“Motor (SHPF front tamper) removal” on
page 354
8 40X9717 1 1 SHPF aligner position sensor
cable
--
9 40X8869 1 1 Sensor (SHPF aligner
position)
“Sensor (SHPF aligner position) removal” on
page 414
10 40X9638 1 1 SHPF ejector cable --
11 40X9530 1 1 Motor (SHPF rear tamper)
“Motor (SHPF rear tamper) removal” on
page 357
12 40X8869 1 1 Sensor (SHPF rear tamper
home)
“Sensor (SHPF rear tamper home) removal”
on page 359
4021, 7421
Parts catalog
600
To Next Page
Loading...
