Lexmark X862de - Page 117

Diagnostic information 2-17
7500-432, -632, and -832
Go Back
Previous
Next
284.05
Paper jam
Check area H
Sensor (lower media exit)
static jam
Paper remains on the sensor (lower media exit).
Refer to the Options Service Manual.
285.00
Paper jam
Check area H
Finisher set eject jam Finisher sensor (compiler media in) is not turned on
within the specified time after the media eject motor
is turned on.
Refer to the Options Service Manual.
286.00
Paper jam
Check area H
Sensor (compiler media in)
static jam
Paper remains on the sensor (compiler media in).
Refer to the Options Service Manual.
287.00
Paper jam
Check area F
Sensor (upper media exit) on
jam A
Sensor (upper media exit) is not turned on within the
specified time after the sensor (finisher media
entrance) is turned on.
At this time, the sensor (bridge unit media exit) is
turned on.
Refer to the Options Service Manual.
287.01
Paper jam
Check area F
Sensor (upper media exit) off
jam A
Sensor (upper media exit) is not turned off within the
specified time after the sensor (upper media exit) is
turned on.
At this time, the sensor (bridge unit media exit) is
turned on.
Refer to the Options Service Manual.
287.02
Paper jam
Check areas
G1, G3
Sensor (upper media exit) on
jam B
Sensor (upper media exit) is not turned on within the
specified time after the sensor (finisher media
entrance) is turned on.
At this time, the sensor (bridge unit media exit) is on
state
Refer to the Options Service Manual.
287.03
Paper jam
Check area
G1
Sensor (upper media exit) on
jam C
Sensor (upper media exit) is not turned on within the
specified time after the sensor (finisher media
entrance) is turned on.
At this time, the sensor (bridge unit media exit) is
turned on.
Refer to the Options Service Manual.
287.04
Paper jam
Check area G
Sensor (upper media exit) off
jam B
Sensor (upper media exit) is not turned off within the
specified time after the sensor (upper media exit) is
turned off.
At this time, the sensor (bridge unit media exit) is
turned off.
Refer to the Options Service Manual.
287.05
Paper jam
Check area F
Sensor (upper media exit)
static jam A
Paper remains on the sensor (upper media exit).
At this time, the sensor (bridge unit media exit) is
turned on.
Refer to the Options Service Manual.
Error code or
message
Error contents Description/Action